- Home
- Equipment
Refine by
Glen Mills Environmental Equipment & Supplies
63 equipment items found
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The vibratory sieve shakers of the series AS 200 are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The controllable electromagnetic drive offers an optimal adaption for every product. Sharp fractions are obtained even after short sieving times. The AS 200 basic sieve shaker is the economical alternative ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The new Air Jet Sieve AS 200 jet is particularly suitable for sieve cuts of powdered materials which require efficient dispersion and deagglomeration. The option to store up to 10 SOPs and the automatic vacuum regulator (accessory) guarantees reproducible and meaningful results. Innovative features such as the Open Mesh function, the selection of the nozzle speed as well as optional use of ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
Solid, high-quality pellets are an important precondition for reliable and meaningful XRF analysis. The PP 25 is a compact benchtop unit with particularly simple and safe operation. With a pressure force of 25 t it is ideally suited for the preparation of solid samples for XRF analysis. The pellets produced are of high quality and are characterized by their high degree of stability. The piston ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The well-proven RETSCH sieves consist of a solid stainless steel sieve frame of high stability for reliable sieving results. Paying close attention to mesh-specific requirements, the sieve fabric is precisely joined into the frame and tautened. RETSCH test sieve provides a clear and accurate labeling with full traceability. The sieves can be easily combined with all other sieve brands. Each ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The vibratory feeder DR 100 is used for the uniform, continuous feeding and conveyance of pourable bulk materials and fine powders. The DR 100 feeds mills, sample dividers, and particle measuring devices, and it is also suitable for other feeding tasks. Its performance, adaptability and compact design makes this device suitable for a great variety of applications. The DR 100 can also be driven ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
A new entry model (SK-300SII) with enhanced functions! “Medium mode” for minimizing mixing heat. “Wave mode” of enhancing mixing and dispersing force. 300ml × 1 ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
Planetary Ball Mills are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of a planetary ball mill result in very high pulverization energy and ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
Planetary Ball Mills are used wherever the highest degree of fineness is required. Apart from the classical mixing and size reduction processes, the mills also meet all the technical requirements for colloidal grinding and have the energy input necessary for mechanical alloying processes. The extremely high centrifugal forces of planetary ball mills result in very high pulverization energy and ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
Cutting mills are suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products. The Cutting Mill SM 400 is ideally suited for pre-cutting of large sample pieces but, depending on the application, may also achieve the required fineness in one step. The high torque of the new 3 kW drive allows for an exceptionally effective preliminary size reduction ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes, even for samples with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. The sample grinder substitutes cumbersome hand mortars by a high performance drive with electronic control. The grinding set can be cooled and heated and is very easy to clean. ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The mixer mill MM 200 is a compact versatile benchtop unit, which has been developed specially for dry grinding of small amounts of sample. It can mix and homogenize powders in only a few seconds. It is also perfectly suitable for the disruption of biological cells as well as for DNA/RNA extraction. You may also be interested in the High Energy Ball Mill Emax, an entirely new type of mill for ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The TM 300 Drum Mill is used for the preparation of granules and powders. The grinding process is performed either in dry or wet conditions. The drum mill can be operated either as a Ball or as a Rod Mill by using the corresponding module. A sufficient number of balls or rods is required for an effective grinding process. Typically, a final fineness below 20 microns is obtained. The drum mill ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The Jaw Crusher BB 200 is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel, its efficiency and safety makes it ideal for sample preparation in laboratories and industrial plants. For small amounts of sample the BB 200 can be used batch-wise; for larger amounts it can be ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The Jaw Crusher BB 300 is used for the rapid, effective crushing and pre-crushing of medium-hard, hard, brittle and tough materials. Its variety of materials offered, including heavy-metal free steel and its efficiency and safety makes the BB 300 ideal for sample preparation in laboratories and industrial plants. For small amounts of sample the Jaw Crusher BB 300 can be used batch-wise; for ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes, even for samples with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness. The sample grinder substitutes cumbersome hand mortars by a high performance drive with electronic control. The grinding set can be cooled and heated and is very easy to clean. ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
Ceramics, includes Aluminum Oxide and Zirconium Oxide (sp.gr. 3.5 to ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
Highest density material available for milling applications. Available as small pellets (not spherical), satellites (balls with bands) and round balls. Cost, medium to high, varies with roundness and ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
The first of the “engineered” class of grinding media, glass beads (small balls) and balls were developed specifically for grinding applications where sand wasn’t available. Glass is manufactured in various grades (Lead-free Soda Lime, borosilicate, low alkali, black glass, and others) in sizes from 1 micron to 2 ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
A faultless and comparable analysis is closely linked to accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotating dividers ensure the representativeness of a sample and thus the reproducibility of the analysis. The sample divider PT 100 divides the sample so exactly that the composition of each fraction of the sample ...
Manufactured by:Glen Mills Inc based inClifton, NEW JERSEY (USA)
A faultless and comparable analysis is closely linked to accurate sample handling. Only a sample representative of the initial material can provide meaningful analysis results. Rotating sample dividers ensure the representativeness of a sample and thus the reproducibility of the analysis. The rotating sample divider PT 300 is specially designed for representative, dust-free division and volume ...